Core Series Amplifier
Linear with Aluminum toroidal transformer
Low distortion Peak Limiter
Class H output stage (70% efficient)
Protection, Soft-start, Short-circuit, Over-voltage, Over-current, Over-load, DC output, Temperature
Simple layout and assembly for easy servicing
Genuine parts exclusively provided by world class suppliers
Compact and Lightweight 2U low depth format
Specifications
| Max output Power EIA 1kHz 1% THD (EIA = 33ms ON / 66ms OFF): |
2x 400W 8 ohms 2x 600W 4 ohms 2 ohms not recommended 1x 1200W 8 ohms (Bridge) |
|---|---|
| Overall gain: | 37.3dB (58 times voltage) |
| Sensitivity at 8 ohms: | 0.775Vrms (0dBu) |
| Signal to Noise Ratio (A weighted, 0dB): | 110dB |
| Frequency Response (-1dB): | 20~20000Hz |
| Typical THD (half power, 1kHz, 8 ohms): | <0.1% |
| Typical IMD (1kHz at 4:1, -20dB): | <0.3% |
| Crosstalk (1kHz): | >65dB |
| Slew Rate: | >15V/us |
| Input Impedance: | 20 kΩ |
| Damping factor (1kHz, 8 ohms): | >500 |
| Protection: | Soft-Start, Short-Circuit, Over-Voltage, Over-Current, Over-Load, DC Output, Temperature |
| Operating Voltage: | 190~260VAC 50-60Hz |
| Preamp: | Low noise and low distortion circuit, PeakStop Opto-Limiter |
| Power Supply (PSU): | Linear topology with toroidal transformer |
| Output stage: |
2-step Class H without cross-rail distortion (70% efficiency) |
| Cooling: | Front to back airflow Temperature regulated fans Copper heat-sink for maximum heat transfer |
| Rear Panel: | 2 NEUTRIK XLR Input with latch, 2 NEUTRIK XLR Link 2 NEUTRIK Speakon NL4 2 speaker Binding post terminals Stereo / Parallel / Bridge switch Ground / Lift switch Magnetic Breaker Power cable directly soldered (3x1.5mm without plug terminal) |
| Speakon Wiring: | SPK1 = 1+1- CH A / 2+2- CH B SPK2 = 1+1- CH B / 2+2- Not Used |
| Net Weight: | 14Kg |
| Gross Weight: | 16Kg |
| Dimensions (W x D x H): | 397 x 378 x 88mm |
| Packaging Dimensions 1pcs/pack: (W x D x H) |
570 x 530 x 180mm |